Drywall applicator

English

1 to less than 7 months

Work must be completed at the physical location. There is no option to work remotely.

Apply, level and smooth coats of plaster
Clean and prepare surfaces
Cure freshly plastered surfaces
Cut and install metal corner beads to protect exterior corners
Fabricate and install suspended metal ceiling grids and place in panels to form acoustical and coffered ceilings
Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
Finish corners and angles and create decorative designs in finish coat, if required
Mould and install ornamental plaster panels, cornices and trim
Smooth out excess compound and allow coat to dry
Tape over joints using taping machine and embed tape in compound
Trowel or spray coats of stucco over exteriors of buildings to form weatherproof surfaces
Attach metal or gypsum lath to studs or furring
Cut openings in lath for heating and ventilation piping, ducts and electrical outlets
Install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath
Install corner beads and wire mesh around beams to which plaster is to be applied
Install exterior and interior steel studs